Inside Climate Analytics, four view tabs let you look at your site data in different ways. Use the Table view, Graph view, Floorplan view, and Sensor Events tabs to switch between them.
Table view
The table view shows all your areas and sensors in one list. Each row shows the area name, current readings (humidity in %RH and temperature in °C), and connection status.
Expand an area row to see the individual sensors inside it. Each sensor shows its current readings and a signal strength badge: Good signal or No signal. A Cloud Connector row will also appear if one is registered to that area; it shows connectivity status but no climate readings.
Use the search bar to find a specific unit, or Filter to narrow the list. You can also Download the table data or use Compare Sensors + to view multiple sensors side by side.
Graph view
The graph view shows a detailed historical chart for a selected sensor. Temperature is plotted on the left axis (°C) and relative humidity on the right axis (%RH). Above the chart you will see the 24-hour fluctuation summary, for example, 24H RH Fluctuations: 1% and 24H Temp Fluctuations: 2.0°C.
Use the time range selector at the bottom of the chart to change the period: 1D, 1W, 1M, 3M, or Custom. Use the scroll arrows on either side of the chart to pan forward or backward through the timeline without changing the selected range.
If a climate rule is assigned to the sensor, its threshold lines appear on the graph as horizontal bands, making it easy to spot when readings went outside the acceptable range.
Below the chart, the Parameters panel controls what is plotted:
- Sensor: toggle Temperature and Relative Humidity on or off. The panel also shows summary statistics for the selected period (min, max, average).
- Outdoor: overlay outdoor temperature and humidity for comparison.
- Other: add extra data to the timeline:
- Comments: shows any notes added manually to the timeline.
- Threshold Events: marks points where sensor readings crossed a rule threshold and triggered a notification.
- Global Events: shows system-wide events such as connectivity drops.
Click Advanced Settings to access additional graph configuration options.
Floorplan view
The floorplan view shows your sensors placed on a building plan.
If no floor plan has been uploaded yet, you will see an Add floor plans + button in the centre of the canvas.
Toggle between Regular (sensor icons only) and See values (icons with live readings) using the buttons at the top left.
The floorplan view only shows sensors that have been manually placed on the plan. Sensors not yet placed will not appear here.
Tips:
- To change the display order of sensors on the plan, drag them to a new position on the canvas.
- To remove a sensor from the floorplan or delete an area entirely, go to Site settings → Manage units.
Sensor Events
The Sensor Events tab is a timestamped log of everything that has happened at the site. Use the All units dropdown to filter by sensor and the search bar to find a specific event. It is split into three tabs:
- Threshold Events: every time a sensor crossed a threshold. Each row shows the sensor and what happened, Entered warning zone, Entered critical zone, or Returned to normal (colour-coded yellow, red, and green), the Measured value at the time, the Rule that was triggered, and a Timestamp. Expand a row for more detail.
- Comments: notes added manually to the timeline.
- Global Events: site-wide events such as connectivity drops. Use + Create global event to log one yourself.
Events are paged, use the arrows at the bottom to move through the history.